Welcome to CGI, Bharatpur
Admissions Open for Session 2022-23, (Courses Offered : MBA (HR, MARKETING, FINANCE), Polytechnic (ELECTRICAL | CIVIL | MECHANICAL )), Limited Seats in all branches.

Fully Equipped Modern Laboratories

For Practical exposure, labs play an important role to understand the concepts.

Physics Laboratory
The institute has a well-equipped spacious and ventilated Physics laboratory with state of the art instruments conforming with the latest technology which caters to the requirements of experiments to be performed. It has a proper dark room to conduct the prescribed experiments related to “OPTICS”.

Chemistry Laboratory
Chemistry lab has a capacity of 30 students to work at a time. The laboratory is equipped with all the nElectricalssary equipments and each student is provided with a separate gas burner, burette and pipette (for titration experiments) at his/her table.

Computer Labs
To facilitate the use of the latest information technology in institute’s teaching, learning, research and administration; to provide an excellent network environment that facilitates the access and exchange of information; to put innovation in technology transfer to assist the Institute in Its mission; to enable faculty, staff and students to use the computer and network resources effectively and efficiently and aim to provide the best quality IT services in the region,.

Civil Labs
Surveying Lab
Surveying is the skill of determining the relative positioning point or object by measured angle or distance. Transversing is done to plot the detail of any building or other structure. Whenever there is a need for precise measurement the triangulation survey is performed. Plane tabling is the method used in surveying the field observation and plotting to determine the relative position of point horizontally as well vertically. Contour is an imaginary line on the ground joining the points of equal elevation.

Structure analysis lab
The behaviour of various structures under the action of the load is studied in S.A. lab. Three hinged & two hinged arches experiment are premed to determine the maximum load that a particular arch can sustain. Apart from maximum load position, horizontal thrust deformation and type of failure are also found out from these experiments. Deformation of the beam is determined by Maxwell Betti's law verification. This experiment gives the maximum permissible load for a beam for certain deformation.

Transportation Engineering
Transportation engineering is the application of technology and scientific principles to the planning, functional design, operation and management of facilities for any mode of transportation in order to provide for the safe, rapid, comfortable, convenient, economical and environmentally compatible movement of people and goods. Highway engineering is a very important part of Transportation Engineering. It includes handling the planning, design, construction and operation of highway, road and vehicular facility.

Fluid mechanics
Flow and fluid properties are studied in a hydraulic laboratory. Determining of energy and momentum coefficient help in determining the energy and momentum of flowing fluid without applying these coefficients a designer may reach a wrong decision.
Actual discharge is determined by multiplying the theoretical discharge to a coefficient called discharge coefficient. This coefficient is determined in the lab and it is different for different orifices, notches and weirs. Study of weirs, notches and orifice helps in designing of them in real life. Weirs are generally constructed on river beds to raise the water level. Notches are attached to canals to control the flow of water.


Concrete Laboratory
Properties of cement and concrete are determined in the concrete lab. Normal consistency gives the idea about the quality of a selection of cement for a particular project. Fineness modulus of cement is related to the initial and final setting time to decide the work rate of concreting and the curing. Generally, the cement having less initial setting time is not desirable since the primary bond which has been formed are broken away while concreting.
Compressive & tensile strength determination of concrete is very important in design filed, without knowing the compressive & tensile strength of concrete a concrete structure or any component cannot be designed workability of concrete is also a factor which should keep in mind while designing.

Soil Mechanics
Soil mechanics is a branch of civil that describes the behaviour of soil. It differs from fluid mechanics and solid in the sense that soil consists of a heterogeneous mixture of fluids usually air and water and particles clay, silt, sand and gravel. There are structures that are supported on or made of soil or structure that are buried in soils like bridge foundation, retaining walls, dam system etc. so we need to know the engineering properties of soil. So we conduct laboratory tests to find out various engineering properties of soil.

Mechanical Labs
PANASONIC AUTOMATION LAB:

WCTM has established the Centre of Competence in Automation Technologies in collaboration with Panasonic. The centre has world-class infrastructure with state-of-the-art equipment, training kits, hardware and software. The centre aims to provide training to undergraduate students of engineering to meet industry requirements.

MECHANICAL ENGINEERING WORKSHOP:

The central workshop comprises of fitting shop, carpentry shop, foundry shop, smithy shop and welding shop. The facility is used mostly by first-year students of all branches.

ENGINEERING GRAPHICS AND DRAWING LAB:

To provide students with an extensive and intensive training course of Engineering Drawing which includes geometric and solid modeling, Isometric, Orthographic Projections and Sectional Views. The lab is used by first-year engineering students.

BASICS OF MECHANICAL ENGINEERING LAB:

BME Lab, as the name suggests, is intended towards laying the foundation of mechanical engineering and at the same time providing the basic understanding of the working principle of simple machines. The lab consists of equipment and models to understand the working principle of boilers, their mountings and accessories and simple machines.

APPLIED THERMODYNAMICS LAB

Different types of boilers with their mountings and accessories, calorimeters, steam condenser and cooling tower experiments are performed in this lab.Different types of boilers with their mountings and accessories, calorimeters, steam condenser and cooling tower experiments are performed in this lab. 

MATERIALS LAB

Here we study and investigate the relationship between the properties of the materials to their atomic structure. Properties are very important in the process of designing durable components, machines, structures, etc. These properties include mechanical properties, thermal properties, electrical properties, optical properties or magnetic properties or deteriorative properties.FLUID MECHANICS AND FLUID MACHINERY LAB:

Fluid mechanics and machinery lab provides facilities for undergraduate teaching, final year projects and for research work leading to postgraduate degrees. This lab consists of several experimental setups for verifying the basic laws of fluid mechanics and some flow measuring devices. This lab houses experimental setups of a Pelton wheel and a Francis turbine which facilitate the study and performance test of turbines. Experimental setups for several pumps also serve the same

STRENGTH OF MATERIALS LAB:

This lab deals with the strength of materials i.e. its hardness, yield stress, tensile and compressive strength, toughness etc. This lab includes the machines by which the strength (impact, tensile, compressive) can be checked along with the variable parameters.

KINEMATICS OF MACHINES LAB:

Mechanism and machine have a considerable fascination for many students of Mechanical Engineering since theoretical principles involved have immediate application practical problem.Mechanism and machine have considerable fascination for many students of Mechanical Engineering since theoretical principles involved have immediate application practical problem.

DYNAMICS OF MACHINES LAB:

The dynamics of machine lab is also as important as kinematic of machine lab. The dynamics of machine lab has great significance in the study of those machines where unbalanced forces play a critical role. This lab enables the students to deal with the problems of balancing and gyroscopic effects.
ADVANCED CAD/CAM LAB:

This lab includes the CNC Lathe Machine Trainer and CNC Milling Machine Trainer that help students work with actual CNC machines. It also has simulation software of milling machine. This lab contains 65 computers of well-suited configuration and license software like AutoCAD, Inventor Series & Solid Works.

Electronics Labs

The basic electronic lab has all the equipment and components to perform all the experiments related to Diodes and other electronic gadgets.
Electrical Technology Lab
This lab has kits for performing all the electrical circuit experiments to verify various network theorems. It also has various electrical generators and transformers.
Analog Electronics Lab
In this lab, we have the equipment, instruments, integrated circuit chips (ICs), and all other components to experiment based on both electrical and digital electronics.
Electro Mechanical Energy Conservation (EMEC) lab
Both AC and DC electrical machines and transformers are installed in this lab to perform all the required experiments on electrical machines.
Microprocessor Lab This lab has both 8085, 8086 and various other microcontrollers chip in sufficient numbers and various interfacing devices like 8253, 8255, ADC and DAC reader card, EPROM program, and an EPROM eraser.
Digital system design lab
In this lab, students are given electronic circuit problems to meet a certain specification. Once the design is complete the circuit is implemented to verify specifications.
Communication lab
This lab has kits and equipment to study various modulation techniques used in communication.
DSP lab
In this lab we have computers loaded with MATLAB software. This lab is used for experimenting on Digital Signal Processing i.e. Fitter Design, Convolution, Correlation etc.
Workshop
The college has a well-equipped workshop where students learn about basic manufacturing methods. Every student prepares jobs in all the sections with her/his own hands under the guidance of experienced faculty and techniques.


WELCOME TO CGI BHARATPUR

ONE OF THE BEST DIPLOMA/ POLYTECHNIC COLLEGE IN BHARATPUR, AFFILIATED TO RTU KOTA AND APPROVED BY AICTE. (CIVIL/ MECHANICAL/ELECTRONICS).

Admission Open!!